Remember the vintage styled hair tie I debuted in this outfit post? Today I want to show you how to make your own version of this cute hair accessory! This tutorial is great if you have a hankering to try sewing, and would like a simple, easy project to begin with.
If you already have sewing skills, you can just download the free pattern for The Vintage Bow Hair Tie and jump right in! {Note: You still might want to skip down to the end for the giveaway however! ♡~ (＾ ε ＾) }
Materials you will need:
- Fabric: 92cm (36.5”) x 12cm (4.75”) or 46cm (18.5”) x 24cm (9.5”)
- Sewing Machine
- Thread to match fabric
- Needle for hand sewing
- Fabric Scissors
- Vintage Bow Hair Tie Pattern
- Pins
Vintage Bow Hair Tie Pattern: Download here
How to make your own Vintage Hair Tie:
Step One: Print out Vintage Bow Hair Tie Pattern twice, and cut out pattern pieces. There should be four in all.
Step Two: Join pattern pieces together as indicated. The broken line tabs should go under the un-broken line tabs. The last piece of the pattern, the rounded tip piece will have to be upside down to sit correctly. The pattern should end up looking like a very long canoe!
Step Three: Fold your fabric over and place pattern on top.
Step Four: Slide any excess fabric back under so that the raw edge of the fabric is under the bottom edge of the pattern, and the fold of the fabric under the top edge of the pattern. This way, when you cut the fabric, there will be very little waste.
Step Five: Cut fabric.
(Option): If you have the smaller width of fabric you can ‘piece’ this pattern together by cutting HALF of the pattern TWICE as shown above.
You should end up with a piece like the one on top if you cut the whole pattern, or two pieces like the ones on the bottom if you cut half of the pattern twice.
Step Six (Option for pieced pattern): If you have pieced the pattern, put the right side {the bright side of the print} of the fabric together and pin.
Step Seven (Option for pieced pattern): Sew along the straight edge to join the two pieces of fabric together. Allow 1/4” to 1/2’'” for the seam allowance.
Step Eight: Fold the fabric in half ~ right sides together.
Step Nine: Starting at one end, allowing 1/2” for the seam allowance, sew along the outside edge of the fabric. (Option): You can sew this seam by machine, or by hand.
Step Ten: Leave a 1 1/2” gap at the opposite end to pull the fabric through the right way.
Step Eleven: Pull the fabric from the inside of the tube, turning it the right way out.
Step Twelve: Press flat with an iron.
Step Thirteen: Tuck the raw edge of the gap in and press.
Step Fourteen: Thread needle, and sew up gap. Start off by passing the needle from inside the fabric tube to the outside, so that the knot end stays hidden inside. You can use the “Stitch in the Ditch” technique to hide your hand sewing, as explained below.
The idea behind the “Stitch in the Ditch” technique is to hide your stitches inside the seam, such that you cannot see the stitches once you have finished. To stitch in the ditch, you pass the needle through the fabric that is tucked INSIDE the gap, and repeat a little further along on the opposite side. Continue up the sides until the gap is ‘bridged’ by the rows of stitches.
The hand sewing sits below the crease made by pressing the raw edges in, and when you pull it tight, it closes the gap and hides the stitches. Knot your work, and pass the needle down into the seam and out through the fabric. Pull the thread taunt when you snip, and the tail of the thread will pull back and disappear into the inside of your fabric tube. Invisible stitches!
Step Fifteen: Enjoy your new vintage-inspired hair tie! A fabulous accessory for those ‘around the house’ days to keep your hair out of your face, or when you are fancied up for day out in your favourite dress. Make a new one every time you sew up a project and you can have co-ordinated hair and wardrobe!
༺ ♡ ༻
I hope you enjoyed this tutorial and have fun making your own vintage hair tie. If you have any questions about anything at all, please don’t hesitate to ask and I’ll do my best to help out.
As always, I’d love to see your creations so please do let me know about them ~ you can share by leaving a comment or link to a blog post, tweet a picture @bjvear or share on Instagram by mentioning @missbjvear, or hashtag #DIYLavenderandTwill so I can take a peek!
༺ ♡ ༻
Now for the exciting part:
For those of you that don’t like sewing, you have a chance to win your own version of the Vintage Hair Tie in this sweet floral print!
~ Giveaway Details ~
Enter the giveaway using the Rafflecopter widget below. You must be a follower of Lavender & Twill to enter {no unfollowing after the giveaway ends please!}, and you can earn additional entries in several ways.
IMPORTANT: Lavender & Twill is now a .com domain, so if you follow through Bloglovin’, you need to update your feed by following the new Bloglovin’ link for Lavender & Twill.
This giveaway is open internationally, and will be open until Sunday, May 31st at 12:00 AM (GMT +10). The winner will be chosen at random through the widget and will be contacted via e-mail by Tuesday, June 2nd {so be sure to use a valid e-mail address}. The winner must respond within 24 hours, or a new winner will be chosen. Thanks for entering and best of luck!
a Rafflecopter giveawayxox,
bonita
༺ ♡ ༻
Find me:
Instagram | missbjvear
Pinterest | bjvear
Ravelry | BJVear
Twitter | bjvear
Youtube | Bonita Vear
All patterns and instructions copyright to BJVear Studio. Available for personal use only, no commercial rights allowed.
